> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.morningstar.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Custom Bank Sequence

In Firmware v3.8, we introduced the Custom Bank Sequence feature, which allows you to re-arrange your banks in a sequence such that when you Bank Up, the banks loaded will follow your custom sequence. This setting can be accessed in the Controller Settings tab.

![](https://storage.crisp.chat/users/helpdesk/website/68a02ce784624c00/a26df3bd-ce33-4447-b20a-aacfdf_1v7pok2.png)

On the left side shows the `Default Bank Sequence` which is the default Bank 1 to 30 sequence. On the right side shows the `Custom Bank Sequence` which is what you can customise. By default, the `Default Bank Sequence` should show on the `Custom Bank Sequence`, unless you have edited the sequence.

Pressing `Reset` will reset the `Custom Bank Sequence` to the `Default Bank Sequence`.  
Pressing `Clear` will clear the `Custom Bank Sequence`. If there are no banks in the sequence, your controller will default to having only Bank 1 as the `Custom Bank Sequence`.

This Custom Bank Sequence can be turned on using the `Follow Custom Bank Sequence` toggle. If that setting is turned on, the Custom Bank Sequence will be followed when you bank up and down. If you only need 4 banks in your set, you can clear the `Custom Bank Sequence` and then add the 4 banks that you need into the sequence.

![](https://storage.crisp.chat/users/helpdesk/website/c1baa542a3882000/f974518f-2d52-4254-9ea5-14febb_zd445a.png)

By doing so, in the example above, when you bank up to `Bank 4`, banking up again will roll you back to `Bank 1`.

You can also re-arrange the banks, so you can load different banks when you bank up or down.

![](https://storage.crisp.chat/users/helpdesk/website/815c59b794643800/f8316f72-f2bf-4e61-bbe4-fa7a9e_1pdsse3.png)

||| This feature is disable when connected to the editor, so you can have access to all the banks for editing.

It is also possible to load duplicate banks into your `Custom Bank Sequence`.

![](https://storage.crisp.chat/users/helpdesk/website/a09e71702459a000/5fa68a23-6e90-42db-8c2e-134639_1rbs0c8.png)