Fractal Audio
More info about using Fractal Audio products with MIDI and their MIDI capabilities can be found here: https://wiki.fractalaudio.com/wiki/index.php?title=MIDI
Only works with the MC6MKII, MC8 and MC6PRO, and with the FM3, FM9 and AxeFX 3.
MIDI OUT from MC needs to be connected to MIDI IN on Fractal device.
MIDI OUT from the Fractal device needs to be connected back to the MC6 MIDI IN
PLEASE CHECK THAT YOU HAVE THE 5-PIN MIDI CABLES ORIENTATED CORRECTLY WHEN CONNECTING TO THE 7-PIN PORTS ON THE MC.
Settings needs to be correct on the Fractal device
MIDI Thru OFF
MIDI Mapping ON
Send MIDI PC ON
Settings on the MC
MIDI Thru OFF
Cross MIDI Thru OFF
Send Realtime SysEx setting on the FM3 / FM9 / AxeFX3 needs to be turned on.
On the AxeFX III, go to Setup >> MIDI/Remote
Navigate to the Bypass tab
Assign a CC number for each specific block. A CC value of 127 will engage the block, and a CC value of 0 will bypass the block.
For example, I have Drive 1 assigned to CC#4. If I send a CC#4 value 127 message, it will engage the Drive 1 block. If I send a CC#4 value 0 message, it will bypass the block.
Fractal Integration Feature
Only works with the MC6MKII, MC8 and MC6PRO, and with the FM3, FM9 and AxeFX 3.
MIDI OUT from MC needs to be connected to MIDI IN on Fractal device.
MIDI OUT from the Fractal device needs to be connected back to the MC6 MIDI IN
PLEASE CHECK THAT YOU HAVE THE 5-PIN MIDI CABLES ORIENTATED CORRECTLY WHEN CONNECTING TO THE 7-PIN PORTS ON THE MC.
Settings needs to be correct on the Fractal device
MIDI Thru OFF
MIDI Mapping ON
Send MIDI PC ON
Settings on the MC
MIDI Thru OFF
Cross MIDI Thru OFF
Fractal Tuner Feature
Send Realtime SysEx setting on the FM3 / FM9 / AxeFX3 needs to be turned on.
Turning On/Off effect blocks on the AxeFX III
On the AxeFX III, go to Setup >> MIDI/Remote
Navigate to the Bypass tab
Assign a CC number for each specific block. A CC value of 127 will engage the block, and a CC value of 0 will bypass the block.
For example, I have Drive 1 assigned to CC#4. If I send a CC#4 value 127 message, it will engage the Drive 1 block. If I send a CC#4 value 0 message, it will bypass the block.
Updated on: 07/10/2024
Thank you!