MC6 PRO LCD issue
Here's what to do if there is an issue with your MC6 PRO LCD i.e. Does not turn on or shows a blank white screen.
The issue is likely caused by the LCD PCB board coming loose from the connectors.
In subsequent productions when this issue was identified, we have added rubber spacers to prevent such an event from occuring.
Remove the backplate
From the left side of the MC6 PRO, check to see if the connector is loose.
If it is, push it back down securely. You can add a dab of hot glue on where the connectors meet to prevent it from dislodging.
The issue is likely caused by the LCD PCB board coming loose from the connectors.
In subsequent productions when this issue was identified, we have added rubber spacers to prevent such an event from occuring.
Steps to check LCD issue
Remove the backplate
From the left side of the MC6 PRO, check to see if the connector is loose.If it is, push it back down securely. You can add a dab of hot glue on where the connectors meet to prevent it from dislodging.
Updated on: 02/04/2025
Thank you!