> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.morningstar.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Testing the MIDI Input on the ML10X

To test the MIDI Input on the ML10X, you can make use of the `Test Function` in the device.

1. Press the menu button and navigate to `Enter Global Settings`
2. When in the Global Settings page, navigate to `Test Function` and select
3. There will be a series of tests available. You can just press the left (back) or right (forward) arrow to go through the tests. Press the right arrow until you see `Test MIDI Read`.
4. If the ML10X receives any MIDI message from the input, it will indicate a `MIDI Received` label on the LCD. This is regardless of the MIDI channel set.

If the ML10X MIDI Input test shows a message that MIDI messages are being received, but you are unable to get your ML10X to respond, please check the MIDI channel on the ML10X. If you are sending a CC message to engage or bypass a loop, please note that the loop has to be selected in the current preset. If it is not part of the preset, then there will be no response.