> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.morningstar.io/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Using more than one ML10X

Yes, it is possible to use multiple ML10X with a MIDI controller. There are a total of 16 MIDI channels, so if you want to control each ML10X independently, then you can set each ML10X to an independent MIDI channel (i.e. ML10X-1 on Channel 1, and ML10X-2 on Channel 2), and then send the PC/CC messages on their respective channels to control each one independently.

If you are utilising the ML10X message type from our MIDI controllers, you can use the Device ID to differentiate each ML10X.

The cable connection will simply be as such:

MIDI Controller DIN-5 OUTPUT >> ML10X-1 MIDI INPUT
ML10X-1 MIDI THRU >> ML10X-2 MIDI INPUT

|| Please note that the devices connected to each ML10X can be re-ordered only within the ML10X that they are connected to.