Multi Engage/Bypass Message Type
Overview
The Multi Engage/Bypass feature lets you map Engage and Bypass CC messages to each of your devices. This then allows you to use a single Multi Engage/Bypass message to set the bypass states of all your devices at once.
MIDI Channel Settings
To map your device's Engage/Bypass functions, go to the Edit MIDI Channel Settings
under the Controller Settings
tab. You'll see that for each MIDI Channel, you can set the CC number and value for Engage and Bypass.
For example, if I had my Timeline on MIDI Channel 1, I will set my Engage message to CC#102 value 127, and my Bypass message to CC#102 value 0, as per their MIDI implementation
Device Engage/Bypass message type
Go to your preset settings and look for the Device Engage/Bypass message type:
There are 3 options under Type, which are Engage
, Bypass
and Set
Engage
Mapped Engage
CC messages will be sent to checkmarked devices. Unchecked devices will be unaffected.
Bypass
Mapped Bypass
CC messages will be sent to checkmarked devices. Unchecked devices will be unaffected.
Set
Mapped Engage
and Bypass
messages will be sent simultaneously. If a device is checkmarked, its Engage
CC message will be sent to it. If left unchecked, its Bypass
CC message will be sent to it. If the Engage
or Bypass
feature is not enabled for a particular MIDI channel then nothing will be sent for that channel's device.
Updated on: 22/09/2025
Thank you!