This feature is still under beta testing

Overview

Consider this connection:


When A Tip is bypassed, the connection will look like this:


Pretty straightforward stuff. The complication arises when the signals split and merge.

Consider this slightly more complicated connection:


An A Tip bypass will look like this:



Another even more complicated scenario:


An A Tip bypass will look like this:


Basically, the prior loops will take on the connections to the outputs on A Tip. This may or may not work for your use-case.

Feedback Loops

Consider this scenario:



Now, if A Tip is bypassed, the connection will look like this:


You can see that there is a feedback loop which will introduce a whine/noise if your signal is on high gain:

Cut/Restore Outputs

If using the ML10X message type on our MC controllers, on top of ENGAGE and BYPASS of loops, you can also choose to CUT or RESTORE the output of the loops.


In the same scenario earlier, instead of bypassing A Tip, you can choose to cut the output on A Tip, which will give you a connection like this:


This will give you the ability to merge, or A/B certain pedals by breaking the merge connection.

Updated on: 28/06/2024