How to use a Mono Send / Stereo Return pedal with the ML10X
If you want to use a Mono Input / Stereo Output pedal with the ML10X, this article describes how to do it.
We will use the Chase Bliss Mood in this example, which has a Mono Input and a Stereo Output.
You will need to utilise an additional loop for the Stereo return. In this example, the cable connections are as such:
Guitar >> ML10X Input Tip
ML10X Send A Tip >> Mood Input
Mood Output Tip >> ML10X Return A Tip
Mood Output Ring >> ML10X Return A Ring
In Simple mode, the routing will be as such:

The Input Ring can be ignored in Simple Mode if you have the Mood R set to be the first in the Ring connection. This is because nothing is connected to Send A Ring and hence the Input Ring is not connected to anything.
In Advanced Mode, the same connection will look like this:

We will use the Chase Bliss Mood in this example, which has a Mono Input and a Stereo Output.
You will need to utilise an additional loop for the Stereo return. In this example, the cable connections are as such:
Guitar >> ML10X Input Tip
ML10X Send A Tip >> Mood Input
Mood Output Tip >> ML10X Return A Tip
Mood Output Ring >> ML10X Return A Ring
Simple Mode
In Simple mode, the routing will be as such:

The Input Ring can be ignored in Simple Mode if you have the Mood R set to be the first in the Ring connection. This is because nothing is connected to Send A Ring and hence the Input Ring is not connected to anything.
Advanced Mode
In Advanced Mode, the same connection will look like this:

Updated on: 03/02/2025
Thank you!