Loop Bypass Persist (maintaining bypass state across presets on ML10X)

Loop Bypass Persist is a feature that can be enabled in your "Controller Settings."

• When it is turned "ON," the engage/bypass state of your loops do not change when you load a different preset. The only way to change them is directly via MIDI messaging (CCs or the "ML10X" message type on Morningstar controllers) or using the hardware interface if using Simple Mode presets. The initial engage/bypass state is defined by the first loaded preset (Preset 0 on Bank 1).
•  When it is turned "OFF," each preset loads a default engage/bypass state for your loops, in addition to the signal chain. This is the default setting for the ML10X.

Updated on: 03/03/2026