Transferring backup file from a different model
It is possible to use a backup file from a different model and uploading it to another. For example, you can use a backup file from a MC6MKII and upload it to a MC6 PRO.
However, do note that only the overlapped presets will be filled. Following the example above, since the MC6MKII has 12 presets (A - L) and the MC6 PRO has 24, only Preset A-L will be filled when you load the backup file from the MC6MKII to the MC6 PRO.
There are a number of model-specific message types such as Set Toggle, where the parameters are different between models (due to the number of presets or other features). These messages may not translate correctly to a different model, and hence need to be checked after uploading the file.
Only overlapped presets will be filled
However, do note that only the overlapped presets will be filled. Following the example above, since the MC6MKII has 12 presets (A - L) and the MC6 PRO has 24, only Preset A-L will be filled when you load the backup file from the MC6MKII to the MC6 PRO.
Model specific message types need to be checked.
There are a number of model-specific message types such as Set Toggle, where the parameters are different between models (due to the number of presets or other features). These messages may not translate correctly to a different model, and hence need to be checked after uploading the file.
Updated on: 04/01/2024
Thank you!