• Fractal Audio

  More info about using Fractal Audio products with MIDI and their MIDI capabilities can be found here: https://wiki.fractalaudio.com/wiki/index.php?title=MIDI Fractal Integration Feature Only works with the MC6MKII, MC8 and MC6PRO, and with the FM3, FM9 and AxeFX 3. MIDI OUT from MC needs to be connected to MIDI IN on Fractal device. MIDI OUT from the Fractal device needs to be connected back to the MC6 MIDI INFew readers

• Boss

  Boss FS7 Footswitch When using the FS7 as an Aux Switch, the FS7 needs to be powered in order for it to work as a momentary switch. The polarity setting needs to be set to II and Mode to MOMENTARY. As usual, a Stereo TRS cable needs to be used - a Mono TS cable will not work. (https://storage.crisp.chat/users/helpdesk/website/25b3cf0205799600/a650800d-2e61-4a77Few readers

• Line 6

  HX Stomp On using MIDI Clock with the HX Stomp Question: I have been trying to setup the specular tempus and am having difficulties with the midi clock. For some reason it is doubling my time. When I do it on the pedal it works fine. But when I do it from the controller it changes to double time. Any idea what it could be? Answer: Turn midi transmit off in global settings on the stomp. I was running my mc8 into the stomp and out to the tempus via midi out/thru. I believe it says TFew readers

• Quantiloop

  On getting Momentary switch functionality in the App It turns out Quantiloop is backwards.  I can get full functionality as a momentary switch by programming in the editor a CC value of 127 on press and CC value of 0 on release all.Few readers

• iConnectivity

  mioXM / mioXL These MIDI interfaces will not interface with the MC3/6/8 when the Keyboard interface firmware used. This is not an issue with the MC3/6/8. https://iconnectivity.supportbee.io/53-iconnectivity-knowledgebase/534-midi/8517-what-does-the-host-port-on-my-iconnectivity-interface-do This port is not a normal USB port - it is designed solFew readers

• Zoom

  Zoom MS-50G There is no official MIDI implementation and support from Zoom with regards to MIDI capabilities in this product, but users have found it possible to control the device using MIDI from a USB MIDI Host.Few readers

• Neural DSP

  Controlling Plugins with MIDI https://neuraldsp.com/getting-started/controlling-plugins-with-midi MIDI Mapping If you are intending to send only one message to trigger a function in a Neural DSP plugin, be sure to set the MIDI Type to CC Toggle. The CC message needs to have a value of 127. RunniFew readers

• Source Audio

  Source Audio Collider Lag in audio when changing presets With two DSPs to clear out, then load in the next engines, there’s double the amount of work the pedal has to do to lose presets, especially compared to the nemesis (one DSP) or the ventris in single mode (two DSPs but only using one when in single mode, otherwise in dual mode it has the same lag as collider, which is always in dual mode given the 2 unique sides of the pedal). So it’s unfortunately not something we can get aroFew readers

• Eventide

  H9 MIDI Connection MIDI connection does not work when the H9 is connected to the computer via USB. USB needs to be plugged before the MIDI ports will work on the H9. Output Volume The Output Volume function does not boost the volume. It just sets the output volume from 0 - 100%.Few readers

• Apple

  Logic Pro By default, Logic Pro mirrors in coming MIDI messages back to connected MIDI devices. So, if you are sending a MIDI channel on the same channel as your controller, your controller might respond to the MIDI message being sent (whether changing channels if its is a PC message etc). This option needs to be turned off, or your MIDI controller needs to be set to an independent MIDI channel.Few readers

• Loopy Pro App

  Delay when using MIDI to trigger app functions If using CC messages to trigger functions with the MIDI Learn feature, Loopy Pro expects a CC value 127 and value 0 message. If you are only sending a CC value 127 message, Loopy Pro will see it as a switch being held down and the MIDI Learn feature will adjust as such: This will cause some delays when triggering functions in theFew readers

• Ableton

  Enabling Arm on Selection in Ableton Arm on Selection in Ableton allows you to automatically arm the track as soon as it is selected. This option is not enabled by default in Ableton, and requires you to place a text file in the Ableton folder. The above mentioned folders can be found here Windows: UsersUsernameAppDataRoamingAbletonLive x.x.xPreferences Mac OS X:Few readers

• Kemper

  Profiler MIDI OUT and MIDI Thru ports on the Kemper do not pass SysEx messages through.Few readers

• Dunlop

  DVP4 Expression Pedal The settings in the DVP4 should be as above for use as an expression pedal.Few readers

• Two Notes

  Opus There is a delay when changing presets on the Opus, when sending a PC message. In the video below, the Opus is connected directly to the Timeline MIDI Thru port. Both are responding to the same PC message on the same channel. You can see that the Opus takes longer to change presets as compared to the Timeline.Few readers

• Strymon

  Brig Bugs While sending MIDI Clock to the Brig, there is a bug where sending PC messages to the Brig will cause it to not follow the MIDI Clock BPM on some occations.Few readers